2

Easy Installation Of Windows 7 in MacBook Pro Via Bootcamp [How To]

June 9, 2012 · by Admin · in Apple, Mac

Just finished installing Windows 7 on my Macbook Pro via Bootcamp, and here’s how I did it.

You will need the following:

All firmware updates installed on your Mac (use Apple Button -> Software Update… to check)A Windows 7 installation DVD

Around 30GB of empty hard drive space on your Mac. You can probably get away allocating less than 30GB to Windows 7, but it will leave very little room to install anything in Windows and if you only purpose is to run games on Windows then I’d say allot around 160GB at least.

Though not absolutely required as I didn’t back it up before installing windows, it’s a VERY good idea to have a complete back up for you Mac before hand, because part of the process involves partitioning your drive, there’s always the distinct chance something will go wrong and everything will be wiped out.
Patience, possibly a great deal of it. Having a tablet or a laptop handy to play a few games or a book to read might be a nice idea.

Also if you are using a old Macbook Pro with Snow Leopard and older then you will need the disc you got with in the box. And if Lion then you will have to download the Windows 7 drivers beforehand from the bootcamp link.

Installing Windows 7 via Boot Camp

Here goes. First thing – close absolutely every open program you can. That includes those things running in the Apple Menu that you always forget about. Don’t worry about killing the Dock or Dashboard – having those running is fine.
Now open a Finder and navigate to Applications -> Utilities and double-click Boot Camp Assistant.

Click Continue on the initial Introduction screen. Ignore the fact that it doesn’t mention Windows 7 as a possible OS to install.
Now you have to decide how much space you want to allocate to Windows 7. You might be able to get away with going as low as 10GB, but I would highly advise against it. You’ll have almost no space left over to install software, and your page file in Windows might cause frequent crashes. I opted for 160GB, which left me with just a bit over 130GB to use after installing Windows 7. To change the amount of space to dedicate to Windows 7, click the small divider between Mac OS X and Windows, and drag it to the left.

Once you’ve determined how much space you want to allocate to Windows 7, click thePartition button.

The partitioning itself doesn’t take particularly long. If you receive an error, proceed to step 10 of the “How to install Windows 7 with Boot Camp” tutorial. It provides all the troubleshooting info you need to resolve partitioning issues. Once you’ve cleared up any problems, or if everything just goes smoothly, proceed with the next step in this tutorial.

Once completed you’ll notice a new BOOTCAMP drive on your desktop.

Now insert your Windows 7 DVD and click the Start Installation button.

Your Mac will restart, and Windows 7 will boot. You’ll be prompted with a window asking you which partition you want to install Windows on. Select the one with BOOTCAMP in theName column. Selecting anything else may wipe out OS X or cause serious problems. Then select the Drive options (advanced) link.

With the BOOTCAMP volume still selected, click the Format link.

Click OK

And Windows 7 will begin to install. It’s a fairly boring process, so you may want to grab yourself a cup of coffee or your beverage of choice. But don’t go too far away, because when your system reboots, you’ll need to remove the Windows 7 DVD.

With the Windows 7 DVD removed, your Mac will automatically boot back into Windows 7, and the installation will complete. You’ll be prompted to select your language, keyboard layout etc.
The rest of the Windows 7 installation process is very straight forward. Once the installation has completed and your Mac has restarted again, you’ll be able to use Windows 7.
WiFi will work immediately (no drivers to install) so connect to the Internet. Windows 7 will then begin to download updates, including the proper video card driver. Let it do its thing.

Once completed, you’ll be prompted to reboot yet again. Do so.

Once Windows 7 boots back up again, you’ll notice the resolution is much better, and you can enable the advanced graphics features.

But if you check for sound, you’ll notice there are no sound drivers installed.

Insert your OS X Leopard (or Snow Leopard) DVD. When prompted, select Run setup.exe.Note: If you’re using Snow Leopard and a message pops up saying “Remote Install Mac OS X”, close that window and eject the CD. Put the CD in again and this time select “Open folder to view files”, navigate to the Bootcamp folder, and run setup.exe.
And if its Lion used access the downloaded Win7 drivers and install.

The Boot Camp installer will launch. Click Next to begin.

Select I accept the terms in the license agreement and then click Next again.

Make sure that Apple Software Update for Windows is checked, and click Install.

The Boot Camp installer will do its thing, and install all the required drivers.

Notifications will pop up with each driver that gets installed.

Once completed, click Finish.


And yet again you’ll be prompted to reboot. Remove your OS X Leopard DVD from the drive, and click Yes to restart.

At this point most of the hardware on your Mac should be working in Windows. However, some iMacs and MacBook Pro’s will have to update to the 3.1 version of Boot Camp for Windows.
That’s it, you’re done! When your Mac boots, hold down the Option key to select which Operating System you want to boot into.

…………………………………………………………………………………………..

http://manuals.info.apple.com/en/boot_camp_install-setup.pdf
Note : You should back up your all documents before you start installing Windows 7 on your Macbook pro. And this article cannot be held responsible for any data loss or any losses as its just for informational purposes and compiled via various other sources.
Note: If you’d rather not dual boot OS X and Windows 7, you can always install Windows 7 in a virtual environment using Parallels Desktop 6.0 for Mac